Water resistant surface
FiberClad Composite Classic Cladding profile is protected by a polyethylene film on its entire surface that offers excellent weather resistance and avoids moisture absorption. Co-extrusion also effectively protects it from the sun’s UV rays.
A unique technology that guarantees a use for 20 years without any colour change.
Extra wide profile
The 13x173mm section have a useful net width of 160mm.
The 4 colours proposed are all multi-chromatic with hues very close to the exotic wood. The hollow profile reduces the weight of the structure and facilitates its implementation.
33 x 170 x 3600 mm | 7,52 kg (unit)
(effective surface = 0,504 m2)
A bio-sourced eco-materials
FiberClad Composite Classic Cladding is made from biobased materials. Wood fibers (scrap and sawmill waste) make up 60% of the product’s composition. The plastic used to bind the fibers is also recycled to more than 95% and comes mainly from recycled plastic bottles. Finally, WEO siding boards are all 100% recyclable at their end of life.
Hidden fastners easy to install
FiberClad Composite Classic cladding is installed using invisible stainless steel clips on wooden or aluminum battens.
Cladding boards fit into each other while maintaining a gap of 2mm between the support and the board to allow ventilation of the battens. 7 clips required per board.
U starting profile and Angle corner
FiberClad Composite Classic Cladding are available with an aluminium range of profiles to facilitate their implementation :
A U aluminum starter profile to be fixed horizontally to support the first board.
An aluminium corner angle of 35x35mm – 3,6m length matching with the colour of FiberClad Classic profile.