4×1.5″ C24 Timber Rough Sawn Whitewood (100×35 mm) – 4.8 m
€12.09
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 39 | — | €12.09 |
| 40 - 80 | 4% | €11.61 |
| 81+ | 8% | €11.12 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Product specification
- Length
- 4800 mm
- Width
- 100 mm
- Thickness
- 35 mm
- Weight
- 7.90 kg
- Material
- Timber
- Wood Type
- Softwood
Whitewood Timber
4×1.5 whitewood, 100 by 35 mm, is the non-loadbearing partition stud: internal walls that divide a space and carry plasterboard rather than the floor above. Strength-graded to C24 and kiln-dried below 22% moisture content, it is supplied with the specifications needed for sign-off on regulated work. It comes in 4.8 m and 5.4 m lengths. Stocked in our warehouse for delivery across Ireland.
Why Whitewood?
A partition wants to be light, straight and quick, and a 35 mm stud is all three. You get a wall thin enough not to eat the room, stiff enough to take board on both faces, and light enough to stand a full storey height frame by hand. Because the grading is C24 rather than ungraded carcassing, the pack is consistent and you are not culling bowed pieces as you go.
Installation guidance
Work off head and sole plates rather than fixing stud to stud, and set studs at 400 mm centres where the board needs the support or 600 mm where the specification allows it. Add noggins at every horizontal board joint and anywhere a fixing will land later. Check each stud for bow before it goes in and turn the crown consistently, so the finished wall reads flat under a straight edge.
Finishing & maintenance
This is an internal timber. It takes primer and paint once covered, but it has no resistance to damp, so a partition in a bathroom, utility or garage that can wet should be built in the treated equivalent from our C24 treated timber range. Keep the pack flat and off the floor on site; a stud stored on edge overnight in a wet room will not be straight in the morning. Compare it with the loadbearing studs in our C24 timber range. To compare sawn and treated sizes side by side, see our construction timber page.