Length
Width
Thickness
Colour Tone
Profile
Material
Fire Rating
Range
Species
Wood Type
Warranty
Moisture Content
Fencing Accessories
Fencing accessories are the gates, gate frames and panel cappings that turn a row of fence panels into a finished boundary. Choose from fence panel capping in treated spruce, black sprayed spruce or hardwood, each strip sized to cap one standard 1800×1800 mm panel, plus garden gates in Ecowood and English chestnut and gate frames up to 2100 mm high. Everything is stocked in our warehouse and delivered across Ireland.
Sort by
Showing 1-12 of 19 results
Fencing Accessories for Sale in Ireland
A fence is more than its panels. The top edge and the way in are the two details people notice first, and they are also the parts that take the most weather and wear. Our fencing accessories cover both, in timbers and finishes chosen to match the panels we sell, so the whole boundary looks as if it was built as one.
Fence panel capping
A capping strip sits along the top of each panel. It is the most exposed piece of timber in a fence, so it is shaped to throw rain off and shield the end grain of the panel boards beneath. Each strip has a rebate machined along the underside, so it drops over the panel top and locates itself. Browse the full range of fence panel caps:
- Treated spruce capping (85×35 mm): dried and pressure impregnated, with a pyramid head that sheds water off both sides. For natural softwood fences.
- Black sprayed spruce capping (85×35 mm): sprayed a deep, even black to finish a black fence without breaking the colour.
- Hardwood capping (88×35 mm): cut to suit our 1800×1800 mm hardwood panels, so one strip caps one panel with no joint on show.
Garden gates and gate frames
A gate should match the fence and close firmly every time. Our garden gates range includes complete gates and the frames that make hanging them easy:
- Joyce Ecowood garden gate set (1000×1950 mm): matches the Joyce Ecowood fence panel, with a cylinder lock, handles and stainless steel fittings.
- English chestnut gate: cleft sweet chestnut, supplied with matching chestnut posts and a fitting kit, for chestnut paling runs, paddocks and rural driveways.
- Joyce Ecowood gate frame (1500×2100 mm): with a stop beam, so the gate has something solid to close against.
- Black gate frame (2100 mm high): sprayed black with a built-in door stop. Cut it to 2000 or 1800 mm high and set the width from 900 to 1500 mm. It bolts to concrete posts or to timber posts of at least 88×88 mm.
Choosing accessories to match your fence
Match the accessory to the panel it sits beside. Natural timber fences such as pine fence panels take treated spruce capping, black fences such as spruce fence panels take the black sprayed capping, and hardwood fence panels take hardwood capping. For a rustic boundary, the chestnut gate pairs with chestnut fencing, and the Joyce gate matches Ecowood fence panels.
Fitting and looking after fencing accessories
Pre-drill capping so the section does not split near the ends, and fix down through the cap with stainless steel so nothing rusts or streaks. Hang gates in a frame rather than straight off a post, so they close square and stop rattling. Cut ends on any timber accessory should be sealed, and a coat from our exterior oils and stains every year or two keeps caps and gates looking as good as the fence. A black capping or frame can be touched up with black exterior stain to keep the colour deep.
Fencing accessories go with our full range of garden fence panels, stocked in our warehouse and delivered across Ireland.
Frequently Asked Questions About Fencing Accessories
What does a gate frame do?
A gate frame gives your garden door something solid to close against, so it stops rattling, sagging or blowing open in the wind. Our black frame has a built-in door stop, and the Joyce Ecowood gate frame includes a stop beam.
Can I hang a gate on concrete posts?
Yes, a gate frame makes this much easier. You bolt the black gate frame to the round holes already in your concrete posts with carriage bolts, then hang the gate from the frame for a square, solid result.
What size is the black gate frame?
It is 210 cm high and can be cut to 200 or 180 cm, and you set the width anywhere from 90 to 150 cm. It suits straight-topped fence doors only, not arched ones.
Can I fix a gate frame to timber posts?
Yes. If you are fixing the black gate frame to softwood posts instead of concrete, choose posts of at least 88×88 mm so the frame has solid timber to fix into.
Which fence panel capping should I choose?
Match the capping to the panel. Treated spruce capping (85×35 mm) suits natural softwood fences, black sprayed spruce capping (85×35 mm) finishes a black fence without breaking the colour, and hardwood capping (88×35 mm) is cut for our hardwood panels. Each strip is cut to cap one standard 1800×1800 mm panel, so you order one capping per panel.