Tebo Marine Plywood – Okoume Throughout, BS 1088 – 2500×1220 mm – 18 mm
€196.80
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 14 | — | €196.80 |
| 15 - 29 | 4% | €188.93 |
| 30+ | 8% | €181.06 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Tebo Marine Plywood is manufactured to meet BS 1088 British standards
Lightweight Okoume face and core construction with excellent resistance to damp conditions
Resists delamination and fungal attack; built for boat-building, walkways and wet-area work
Sapele face and core variants available on request where greater durability is the priority
Needs stainless or hot-dip galvanised fixings; plain steel corrodes in the conditions the panel is built for
Cut edges expose unprotected core glue lines; seal all cut edges before installing in wet environments
Product specification
- Length
- 2500 mm
- Width
- 1220 mm
- Thickness
- 18 mm
- Coverage
- 3.05 m²
- Weight
- 26.4 kg
- Material
- Timber
- Wood Type
- Hardwood
18 mm okoume marine plywood is the structural board in the light range. It is the thickness for floors, bases and anything carrying weight, and it is considerably lighter than the hardwood marine board of the same thickness.
Van and horsebox floors are the main one. A vehicle floor has to take people, furniture and everything that gets dropped on it, and it has to do that in a space that gets condensation underneath, so the weight saved on each sheet matters when a conversion might use four or five of them. Bed bases and platforms, galley worktops, boat soles and bulkheads and heavy locker bases are the others. In a building it suits a bathroom or utility floor panel, or a bench in a wet area, where you want the strength but would rather not carry the heavier hardwood board up a flight of stairs.
Cutting and handling
A manageable two person lift at 26.4 kg, against 36.4 kg for the hardwood marine board, and possible alone at a push. Cut with a fine toothed blade and support the sheet across the line; okoume is soft enough that a coarse blade will tear the underside rather than cut it.
Fixing and painting
Pilot edge screws, countersink, and use washers under any fixing that will be loaded, because a soft board lets a plain screw head pull through under vibration. Seal the underside before you lay it: that face sits against the vehicle deck or the subfloor, will never be reachable again, and is the side that sees the worst of the condensation.
Where not to use it
The trade off is hardness. Okoume is softer, so a floor in this board picks up dents that a hardwood board would shrug off, and if the floor takes trolleys, tools or heavy boots every day the hardwood marine board is the better buy. This is the sensible one for a living space. How the two ranges differ is set out on the marine plywood page and the plywood page.