Length
Width
Thickness
Colour Tone
Profile
Material
Fire Rating
Range
Species
Wood Type
Warranty
Moisture Content
Joist Hangers & Brackets
Metal hangers and brackets for joining timber to timber. Our galvanised joist hanger carries a 47 mm joist from 125 to 220 mm deep, such as 6×2 and 7×2, off a beam or ledger. Our heavy duty L brackets reinforce a 90 degree joint where a beam meets a post or two frame members meet at a corner.
Sort by
Joist Hangers and Timber Brackets in Ireland
A timber frame is only as strong as its joints. Where a joist meets a beam, a hanger takes the load in shear instead of relying on screws driven into end grain; where two members meet at a corner, a bracket stops the joint racking. Both are quick to fit and are made for building decks, sheds, garden rooms, floors and pergolas with our C24 timber.
Choosing a hanger
Match the hanger to the width and depth of the joist. Our 47 mm galvanised hanger takes joists 125 to 220 mm deep, and conforms to Eurocode 5 for service class 2. Nail through every hole, and use it in covered or sheltered positions, not on coastal sites or places that stay wet.
Fixings
Fix brackets with structural timber screws such as our C2 exterior wood screws. For posts, use our post connectors instead.
Frequently Asked Questions About Joist Hangers & Brackets
What size joist does the hanger take?
It takes a 47 mm wide joist from 125 to 220 mm deep, which covers 6×2 and 7×2. A 9×2 at 225 mm is deeper than it is rated for.
Can I use the hanger outdoors?
It is pre-galvanised steel rated 2 out of 5 for corrosion, so use it under cover or in sheltered positions such as inside a shed or garden room, or under a deck where it stays mostly dry. It is not for coastal sites or places that stay wet.
When should I use an L bracket?
Use it to reinforce a 90 degree joint, such as a beam onto a post or the corner of a frame. Fix through both faces with structural timber screws, and use two per joint on a structure that takes wind load.


