Standard MDF Sheet – 3050×1525 mm (10×5′) – 15 mm
€125.00
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 14 | — | €125.00 |
| 15 - 29 | 4% | €120.00 |
| 30+ | 8% | €115.00 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Hard, fine, smoothly sanded surface that takes paint, varnish and primer cleanly
L-MDF per EN 622-5 with E1 low-formaldehyde rating; also meets CARB Phase 2 and EPA TSCA Title VI
Dense uniform core machines predictably and gives superior screw and fastener holding
FSC-certified stock available on request; suits joinery, cabinetry, panelling and CNC work
For non-load-bearing dry-condition use; specify Moisture Resistant MDF for kitchens, bathrooms or humid areas
Edges absorb finish faster than the face; best results come with a dedicated MDF primer
Product specification
- Length
- 3050 mm
- Width
- 1525 mm
- Thickness
- 15 mm
- Coverage
- 4.65 m²
- Weight
- 50.2 kg
- Material
- Timber
15 mm MDF is the cabinet thickness in the wide sheet. Nearly every other board is 1220 mm across, and that width quietly decides a lot of joinery: ripped down the middle a 1220 sheet gives two pieces just over 600 mm, while this one gives two just over 760 mm.
Base unit depth plus a worktop overhang lands above 600 mm, and so do most deep shelving and desk modules, so from the narrow sheet every one of those rips leaves a useless strip while the same parts come clean off this one. Over a fitted run the sheet count drops with the waste. The width also gives panels you cannot otherwise have whole: a deep gable, a broad cupboard back, a full width headboard, and with the 3050 mm length a full height gable deeper than a standard unit, with no joint in either direction.
Cutting and handling
At 50.2 kg it is a big awkward rectangle more than a heavy one, but it is still two people on edge, and the doorways want measuring before it arrives because a sheet this wide will not turn on a standard domestic landing. Check the cutting setup as well: 1525 mm overhangs most benches, so it needs a proper track and full support underneath, and the offcut has to be carried or it snaps off the end of the cut.
Fixing and painting
Glue and confirmat for the boxes. Pre-drill anything going into an edge and keep it back from the corner, because the edge splits without a pilot hole. Prime face and edges with a dedicated MDF primer and sand between coats, doing the edges first and letting them sit, since they take a coat more than the face does and a panel this wide leaves you plenty of face to match them to.
Where not to use it
The core swells once it gets wet and does not recover, so if the job is a kitchen, a bathroom or a utility room use the moisture resistant grade instead. The rest of the thicknesses are on the Standard MDF page, and the wider range is on the MDF boards page.