Standard MDF Sheet – 3050×1525 mm (10×5′) – 25 mm
€145.00
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 11 | — | €145.00 |
| 12 - 23 | 4% | €139.20 |
| 24+ | 8% | €133.40 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Hard, fine, smoothly sanded surface that takes paint, varnish and primer cleanly
L-MDF per EN 622-5 with E1 low-formaldehyde rating; also meets CARB Phase 2 and EPA TSCA Title VI
Dense uniform core machines predictably and gives superior screw and fastener holding
FSC-certified stock available on request; suits joinery, cabinetry, panelling and CNC work
For non-load-bearing dry-condition use; specify Moisture Resistant MDF for kitchens, bathrooms or humid areas
Edges absorb finish faster than the face; best results come with a dedicated MDF primer
Product specification
- Length
- 3050 mm
- Width
- 1525 mm
- Thickness
- 25 mm
- Coverage
- 4.65 m²
- Weight
- 83.7 kg
- Material
- Timber
25 mm MDF is the top and shelf board in the wide sheet. The width is what most people are really buying: ripped down the middle a 1220 mm sheet gives two pieces just over 600 mm, while this one gives two just over 760 mm, and deep shelving, counter and desk modules mostly sit above 600 mm.
From the narrow sheet each of those rips throws away a strip; from this one they come off clean and the sheet count on a fitted run drops with them. The size also gives whole pieces that no standard sheet can produce: an island top, a refectory or boardroom table, a deep reception counter, a full width desk return. The edge on all of those is profiled, and a joint in a profiled edge stays visible, because it is lit from the side along the front and no amount of filling hides a step in a bullnose.
Cutting and handling
At 83.7 kg and oversized in both directions this is three people in practice, on edge, with the route measured beforehand, since it will not turn on a domestic landing or clear some doorways. Cut it down where it is delivered, on the flat with a track saw and full support underneath, because a sheet this size overhangs any bench. Store it dead flat on bearers and never leaning: a panel this heavy takes a permanent bow within days and a bowed island top is an expensive loss.
Fixing and painting
Run the edge profile in two or three light passes rather than one deep one, because a single heavy pass burns the core and leaves a fuzzy edge along the front. Pre-drill fixings into the edge and keep them back from the corner. Prime face and edges with a dedicated MDF primer, sand between coats, and give the profile an extra coat before the topcoat.
Where not to use it
The core swells once it gets wet and does not recover, so if the job is a kitchen, a bathroom or a utility room use the moisture resistant grade instead. The rest of the thicknesses are on the Standard MDF page, and the wider range is on the MDF boards page.