Tebo Marine Plywood – Okoume Throughout, BS 1088 – 2500×1220 mm – 9 mm
€123.00
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 14 | — | €123.00 |
| 15 - 29 | 4% | €118.08 |
| 30+ | 8% | €113.16 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Tebo Marine Plywood is manufactured to meet BS 1088 British standards
Lightweight Okoume face and core construction with excellent resistance to damp conditions
Resists delamination and fungal attack; built for boat-building, walkways and wet-area work
Sapele face and core variants available on request where greater durability is the priority
Needs stainless or hot-dip galvanised fixings; plain steel corrodes in the conditions the panel is built for
Cut edges expose unprotected core glue lines; seal all cut edges before installing in wet environments
Product specification
- Length
- 2500 mm
- Width
- 1220 mm
- Thickness
- 9 mm
- Coverage
- 3.05 m²
- Weight
- 13.2 kg
- Material
- Timber
- Wood Type
- Hardwood
9 mm okoume marine plywood is where the board stops being a lining and starts being something you can build from. It is the first thickness in the okoume range that will hold a screw properly, while still being light enough to lift one handed.
Lockers, cupboards and light furniture in boats and campers are the usual work: at 9 mm you can make a box with rebated corners, screw a hinge to it and hang a door, which you cannot sensibly do with the lining thicknesses. It is also the usual choice for a van floor laid over an existing subfloor, or a raised platform under a bed, where the board is supported all over and only has to spread the load rather than span. In a building it suits shelving in a utility or garage and small cupboards in a bathroom.
Cutting and handling
Still a comfortable one person board at 13.2 kg. Okoume is soft, so cut with a fine toothed blade and support the sheet close to the line. Keep the faces off grit while you work, because a soft board picks up a scuff from anything sharp on the bench.
Fixing and painting
Pilot any screw going into an edge, and pilot it properly: okoume is a soft hardwood, so the edge grips well enough for light work but splits more readily than a denser board if you drive a screw in dry. Countersink rather than letting a screw head pull itself into the face, or it will sink in and leave a dished mark that shows on a locker front every time the light catches it. Seal every edge and hole before assembly, because the inside faces of a box are impossible to reach afterwards.
Where not to use it
It is light rather than tough, so a surface that will be walked on or take trolleys wants a denser board such as the hardwood marine sheet. For a carcass carrying real weight go up to 12 mm. The full okoume range is listed on the marine plywood page, with the other grades on the plywood page.