Moisture Resistant MDF Sheet – 3050×1525 mm (10×5′) – 12 mm
€85.50
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 14 | — | €85.50 |
| 15 - 29 | 4% | €82.08 |
| 30+ | 8% | €78.66 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
MDF.H (Option 1) per EN 622-5; classified MDF.HLS for high-density humid-conditions use
Durability Class D3 bond rating; suits kitchens, bathrooms and humid interior areas
Green-dyed core for easy identification on site and in spec inspections
E1 low-formaldehyde; also meets CARB Phase 2 and EPA TSCA Title VI
For interior humid-conditions use; not rated for full external weather exposure
Edges absorb finish faster than the face; seal cuts and use an MDF primer before painting
Product specification
- Length
- 3050 mm
- Width
- 1525 mm
- Thickness
- 12 mm
- Coverage
- 4.65 m²
- Weight
- 42.4 kg
- Material
- Timber
- Wood Type
- Softwood
12 mm moisture resistant MDF 3050×1525 mm is the wide sheet in the green range. Three hundred and five extra millimetres across the sheet does not sound like much until you are laying out a bath panel or a ceiling.
That width is what removes the joint. A standard sheet rips to two pieces a little over 600 mm; this one rips to two over 760 mm, which covers a bath panel, a deep boxing return or a wide splashback substrate in a single piece. On a bathroom ceiling it means fewer runs and, more to the point, fewer seams overhead for steam to work into.
Cutting and handling
At 42.4 kg it is not the weight that decides this but the size: it will not go through a standard doorway flat and it needs two people on edge. Lay your cutting list out on paper before anything is cut, because the saving only exists if the pieces are nested to use the width, and the first wrong cut throws it away. Full length support, sharp fine tooth blade, extraction and a P2 or P3 mask. Two trestles are not enough under a sheet this size.
Fixing and painting
Fix through the face into battens or studs with stainless or plated screws, and pilot near edges. On a wide panel get the support behind it right first: the wider the unsupported area, the more obvious any dishing becomes once the light catches it. Seal all cut edges and prime both faces, particularly on a ceiling panel where the back is unreachable afterwards.
Where not to use it
Steam and splashes yes; a shower lining or anything outdoors, no, and Tricoya MDF is what goes outside. If you do not actually need the width, the 3050×1220 mm sheet gives the same length for less, and the 2440×1220 mm board is cheaper again. The wide sheet also comes in 18 mm. Both sizes and every thickness are set out on the moisture resistant MDF page, with the rest of the boards on the MDF page.