Veneered MDF Board – White Oak – Crown Cut, A/B Grade – 2440×1220 mm (8×4′) – 7 mm
€108.05
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 29 | — | €108.05 |
| 30 - 59 | 4 % | €103.73 |
| 60+ | 8 % | €99.41 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Real white oak crown-cut face veneer on a dimensionally stable MDF substrate; looks like solid timber, stays flat like a panel
A/B commercial grade: clean A-grade show face with a B-grade back at a working price point
Crown cut produces the wider, flame-figured veneer leaves that book-match across large panels
Suits furniture, shop fitting, wall panelling, doors, drawer fronts and hospitality interiors
Face veneer can chip on cross-cuts without scoring first; use a sharp blade and score the cut line
Veneer absorbs stain more strongly than solid timber; test on an offcut and consider a sanding sealer first
Product specification
- Length
- 2440 mm
- Width
- 1220 mm
- Thickness
- 7 mm
- Coverage
- 2.98 m²
- Weight
- 15.02 kg
- Material
- Timber
- Fire Rating
- N/A
- Wood Type
- Hardwood
7 mm oak veneered MDF is the thin panelling board, stiff enough to hold itself flat over a frame without adding any real depth to the detail. Real crown cut white oak goes on both faces, so a panel can be seen from either side.
Door skins, framed wall panelling, infill panels and lift lining are the regular jobs, along with any face that has to sit inside a moulding. It is the thickness to reach for when a design wants oak on a surface but has no room to lose: 7 mm sits into a rebate that 12 mm would not, and over a light frame it stays flat between members where 4 mm would show every one of them.
Cutting and handling
At 15.02 kg it is comfortably a one person sheet. Score the face veneer before the cut, use a fine tooth blade, and support the panel along the line rather than at the ends, because a thin sheet drops into the cut and pinches the blade. Cut with extraction or outdoors in a P2 or P3 mask, and keep the sheets stacked flat while they wait, because a thin veneered board left leaning will bow.
Fixing and painting
Fix through the face or bond it to a substrate; a 7 mm edge will not hold a screw. Iron on veneer edging suits concealed edges, and where the edge is handled a thin solid oak lipping is worth the extra work. Sand to 180 or 240 grit and then leave it alone; the veneer is thinner than people expect and an orbital sander goes through a corner in seconds. If you are staining, test on an offcut first, because a thin veneer takes stain faster than a solid board and darkens more than you expect.
Where not to use it
Dry interiors only, nothing structural, and nothing that has to carry a fixing in its edge. Where the panel will be knocked or take weight, 16 mm or 19 mm is the right board. Every thickness and species is listed on the veneered MDF page, alongside the wider MDF range.