Moisture Resistant MDF Sheet – 2440×1220 mm (8×4′) – 18 mm
€42.85
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 24 | — | €42.85 |
| 25 - 49 | 4% | €41.14 |
| 50+ | 8% | €39.42 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
MDF.H (Option 1) per EN 622-5; classified MDF.HLS for high-density humid-conditions use
Durability Class D3 bond rating; suits kitchens, bathrooms and humid interior areas
Green-dyed core for easy identification on site and in spec inspections
E1 low-formaldehyde; also meets CARB Phase 2 and EPA TSCA Title VI
For interior humid-conditions use; not rated for full external weather exposure
Edges absorb finish faster than the face; seal cuts and use an MDF primer before painting
Product specification
- Length
- 2440 mm
- Width
- 1220 mm
- Thickness
- 18 mm
- Coverage
- 2.98 m²
- Weight
- 40.7 kg
- Material
- Timber
Moisture Resistant MDF Sheet
18 mm moisture resistant MDF is the workhorse of the green range, and the thickness most bathroom and kitchen joinery is built from.
It is substantial enough to build a unit from, hang a door on and take cabinet hardware without compromise, while still being a sheet two people can handle and a saw will cut cleanly in one pass. Vanity units, bathroom and utility cabinets, doors and drawer fronts, boxed in cisterns, panelling and commercial washroom fit out all land here. If a drawing does not state a thickness, this is the one it assumes.
Cutting and handling
A two person lift at 40.7 kg, or one person and a panel trolley. Use a sharp fine tooth blade and support the offcut so it does not tear the underside as it drops away. Cut with extraction or outdoors and wear a P2 or P3 mask. Keep the sheets flat and dry before they go in, because a board that has taken up water at the edge never comes back flat.
Fixing and painting
Pilot drill and use coarse threaded MDF screws; for joints under real load use dowels, biscuits or a mechanical fitting rather than asking the fibre to hold a thread. Every screw, hinge and runner in a damp room should be stainless or properly plated, because bright zinc corrodes and bleeds rust through the paint around each fixing. Seal or lip every cut edge before installation, prime the edges before the faces, and use a primer intended for MDF.
Where not to use it
It resists humidity; it does not survive immersion, so no shower linings and nothing sitting in water. Outdoors, Tricoya MDF is the board that will last. Even at this thickness a shelf deflects over a long span, so lip the front or add a bearer past about 800 mm. Also available as a 3050×1220 mm sheet for full height panelling and a 3050×1525 mm sheet where the extra width saves a joint. The range is on the moisture resistant MDF page, and the other grades we carry are on the MDF page.


