Standard MDF Sheet – 2440×1220 mm (8×4′) – 15 mm
€30.71
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 29 | — | €30.71 |
| 30 - 59 | 4% | €29.48 |
| 60+ | 8% | €28.25 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Hard, fine, smoothly sanded surface that takes paint, varnish and primer cleanly
L-MDF per EN 622-5 with E1 low-formaldehyde rating; also meets CARB Phase 2 and EPA TSCA Title VI
Dense uniform core machines predictably and gives superior screw and fastener holding
FSC-certified stock available on request; suits joinery, cabinetry, panelling and CNC work
For non-load-bearing dry-condition use; specify Moisture Resistant MDF for kitchens, bathrooms or humid areas
Edges absorb finish faster than the face; best results come with a dedicated MDF primer
Product specification
- Length
- 2440 mm
- Width
- 1220 mm
- Thickness
- 15 mm
- Coverage
- 2.98 m²
- Weight
- 32.1 kg
- Material
- Timber
15 mm MDF builds the same unit as the standard 18 mm board and leaves more room inside it. Across a fitted run the saving adds up: two sides and a divider at 15 mm rather than 18 mm give back nine millimetres of internal width, which in a narrow utility or a boxed alcove is the difference between a shelf that takes the boxes and one that nearly does. It still holds a confirmat, a dowel and a hinge plate.
The other gain is weight, and it shows up when the unit has to go on a wall. A tall wardrobe or a wall hung cabinet built in 15 mm comes out about a sixth lighter than the same piece in 18 mm, which matters when two people are lifting it onto brackets on a landing.
Cutting and handling
At 32.1 kg a full sheet is a two person carry on edge, broken down on trestles rather than worked off the floor. Tape the cut line on any face that will be seen, because the fine surface chips as readily as it machines well and a chipped edge on a visible side does not fill invisibly. Cut the two sides of a unit clamped together as a pair so they match each other exactly.
Fixing and painting
Glue and confirmat is the quickest strong joint at this depth, though the screw is near the limit of what a 15 mm edge takes at full length, so drill the pilot accurately and keep the fixing back from the corner. Prime face and edges with a dedicated MDF primer, doing the edges first and letting them dry before the flat, since they take a coat more than the face and a half absorbed edge drags the topcoat.
Where not to use it
The core swells once it gets wet and does not recover, so if the job is a kitchen, a bathroom or a utility room use the moisture resistant grade instead. Check the hardware before committing to it as well, because shelf pin systems are set out for an 18 mm edge. The rest of the thicknesses are on the Standard MDF page, and the wider range is on the MDF boards page.