Standard MDF Sheet – 2440×1220 mm (8×4′) – 38 mm
€105.00
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | €105.00 |
| 10 - 19 | 4% | €100.80 |
| 20+ | 8% | €96.60 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Hard, fine, smoothly sanded surface that takes paint, varnish and primer cleanly
L-MDF per EN 622-5 with E1 low-formaldehyde rating; also meets CARB Phase 2 and EPA TSCA Title VI
Dense uniform core machines predictably and gives superior screw and fastener holding
FSC-certified stock available on request; suits joinery, cabinetry, panelling and CNC work
For non-load-bearing dry-condition use; specify Moisture Resistant MDF for kitchens, bathrooms or humid areas
Edges absorb finish faster than the face; best results come with a dedicated MDF primer
Product specification
- Length
- 2440 mm
- Width
- 1220 mm
- Thickness
- 38 mm
- Coverage
- 2.98 m²
- Weight
- 81.4 kg
- Material
- Timber
38 mm MDF is bought for stiffness rather than strength. A panel this deep resists deflection so far beyond a normal board that a counter or a shelf can run the length of a room supported only at its ends and still look dead straight along the front, which is what a drawing is asking for when it calls out this depth. Strength is not the question, because a thinner board takes the load without breaking, it simply will not stay flat while it does.
Laminating two thinner boards to the same depth does not get you there, because the glue line creeps under sustained load, so a built up top holds its line for a season and then takes a slow set that nothing will pull out. Bar counters, commercial serving tops, painted stair treads and bench tables are cut from one piece for that reason.
Cutting and handling
At 81.4 kg a full sheet is mechanical handling or three people on edge with the route measured beforehand. It will not go into a first floor room whole, so cut it down at ground level and carry manageable pieces. Cut on the flat with a track saw, stepping the depth down over two passes, since one full depth pass loads the blade, burns the cut face and wanders off the line.
Fixing and painting
Profile the exposed edge in several light passes and sand it properly, because a deep painted edge on a counter sits at eye level for anyone standing at it. Prime face and edges with a dedicated MDF primer and sand between coats, then pick a topcoat rated for the traffic the piece will see, since a bar front takes daily wear that a shelf never gets.
Where not to use it
The core swells once it gets wet and does not recover, so if the job is a kitchen, a bathroom or a wash up area use the moisture resistant grade instead. Short spans are wasted on it as well, because weight and price both climb steeply above 25 mm. The rest of the thicknesses are on the Standard MDF page, and the wider range is on the MDF boards page.