Standard MDF Sheet – 3050×1220 mm (10×4′) – 15 mm
€69.50
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 29 | — | €69.50 |
| 30 - 59 | 4% | €66.72 |
| 60+ | 8% | €63.94 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Hard, fine, smoothly sanded surface that takes paint, varnish and primer cleanly
L-MDF per EN 622-5 with E1 low-formaldehyde rating; also meets CARB Phase 2 and EPA TSCA Title VI
Dense uniform core machines predictably and gives superior screw and fastener holding
FSC-certified stock available on request; suits joinery, cabinetry, panelling and CNC work
For non-load-bearing dry-condition use; specify Moisture Resistant MDF for kitchens, bathrooms or humid areas
Edges absorb finish faster than the face; best results come with a dedicated MDF primer
Product specification
- Length
- 3050 mm
- Width
- 1220 mm
- Thickness
- 15 mm
- Coverage
- 3.72 m²
- Weight
- 40.2 kg
- Material
- Timber
15 mm MDF is the cabinet thickness in the long sheet. It takes a confirmat at full depth, a hinge plate and a shelf pin system, and it leaves a little more room inside the unit than a heavier board does, which is worth having in a tall wardrobe where every panel in the run eats the width.
The length is the real purchase. A full height wardrobe, a larder, alcove joinery or a library shelving standard comes out as one upright from floor to ceiling, with no cross joint halfway up the gable, and a cross joint is the line that opens first as the unit settles and the building moves. One piece also comes off the saw straight and square with no joining operation on any upright, so the run goes together faster. Under 2440 mm the 2440×1220 mm sheet does the same work for less.
Cutting and handling
At 40.2 kg it is two people on edge, and it wants cutting down before you do anything else with it. Store it flat and fully supported rather than leaning, because a sheet this long takes a bow within a couple of days and a bowed gable fights you all the way up the wall. Cut on the flat with a track saw: feeding this length across a table saw single handed is how a rip wanders, and a tapered gable throws the whole unit out.
Fixing and painting
Glue and confirmat is the quickest strong joint at this thickness. Pre-drill everything going into an edge and keep it back from the corner, because the edge splits without a pilot hole and a split in a full height gable wastes the whole length. Prime face and edges with a dedicated MDF primer and sand between coats, doing the edges first and letting them sit, since they take a coat more than the face.
Where not to use it
The core swells once it gets wet and does not recover, so if the job is a kitchen, a bathroom or a utility room use the moisture resistant grade instead. The rest of the thicknesses are on the Standard MDF page, and the wider range is on the MDF boards page.