Standard MDF Sheet – 3050×1220 mm (10×4′) – 30 mm
€98.50
In stock
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 11 | — | €98.50 |
| 12 - 24 | 4% | €94.56 |
| 25+ | 8% | €90.62 |
Your security and privacy are at the heart of everything we do. Every purchase you make is protected by industry‑leading safeguards designed to keep your personal and payment information safe.
Secure Payments
Pay with complete confidence using our trusted, fully protected payment methods. Your card details remain secure, uncompromised, and handled with strict care.
All sensitive data is encrypted from end to end, and we never sell or share your card information, ever.
Payment Methods
We accept credit and debit cards from most major credit issuers. Your card can be saved for future purchases and you can remove or edit the card information at any time. For questions regarding your transactions on our site, please consult your card-issuing bank.
We deliver across all four zones defined below.
Quantity savings
Enjoy automatic discounts as soon as your basket qualifies—no codes, no hassle.
Buy 25–49 units
Get 3% off your entire qualifying product order.
Buy 50+ units
Get 5% off your entire qualifying product order.
How it works
Your discount is applied automatically at checkout based on the total quantity of eligible items in your basket. The more you buy, the more you save—simple, transparent, and designed to reward our customers.
Hard, fine, smoothly sanded surface that takes paint, varnish and primer cleanly
L-MDF per EN 622-5 with E1 low-formaldehyde rating; also meets CARB Phase 2 and EPA TSCA Title VI
Dense uniform core machines predictably and gives superior screw and fastener holding
FSC-certified stock available on request; suits joinery, cabinetry, panelling and CNC work
For non-load-bearing dry-condition use; specify Moisture Resistant MDF for kitchens, bathrooms or humid areas
Edges absorb finish faster than the face; best results come with a dedicated MDF primer
Product specification
- Length
- 3050 mm
- Width
- 1220 mm
- Thickness
- 30 mm
- Coverage
- 3.72 m²
- Weight
- 80.4 kg
- Material
- Timber
30 mm MDF is slab depth in a single board. At this depth the edge is the detail: a painted counter, a bar front, a reception desk or a floating shelf reads as solid, and the exposed edge carries a bullnose, a wide chamfer or a shadow gap straight off the board.
The length is what lets that edge run the whole piece. A counter at 3050 mm comes out unbroken, so there is no cross joint in the working surface and nothing interrupting the profile, where on a jointed top the seam shows in the profiled edge first, catching the side light along its full length. A cross joint is also the line that opens first as the building moves. The depth spans as well, so a bench or a window seat carries real load on end supports only and stays flat instead of settling into a curve. Under 2440 mm the 2440×1220 mm sheet is the cheaper board.
Cutting and handling
At 80.4 kg this is three people in practice, on edge, with the doorways measured and the route cleared beforehand. It does not go up a domestic stairs comfortably in one piece, so break it down in the garage or the van rather than in the room, cutting on the flat with a track saw and a sharp blade. Store it dead flat on bearers and never leaning, because a slab this heavy takes a permanent bow in a matter of days.
Fixing and painting
Run the edge profile in several light passes so the cutter clears rather than burns, and budget real time for sanding it back. Pre-drill any fixing that goes into the edge. Prime face and edges with a dedicated MDF primer, sand between coats, and give the profile an extra pass before the topcoat, because a deep painted edge at eye level shows every ripple in the light.
Where not to use it
The core swells once it gets wet and does not recover, so if the job is a kitchen, a bathroom or a utility room use the moisture resistant grade instead. The rest of the thicknesses are on the Standard MDF page, and the wider range is on the MDF boards page.